Niet aangemeldRX8NL.COM
Forum Hulp Zoek Registreren Aanmelden
Omhoog Onderwerp Commercieel / Commercieel / Te Koop: Performance Coil Bracket (nieuw)
- Van Michael Z (SuperForumposter) [nl] op 25-04-2016 18:28
Bij deze bied ik mijn performance coil bracket te koop aan, deze is nieuw en nog ongebruikt.

Ik heb deze destijds aangeschaft en geimporteerd uit de USA om mijn OEM onsteking een upgrade te geven, echter zijn de plannen gewijzigd en is de OEM (of een geupgrade OEM) ontsteking niet voldoende meer voor mijn wensen.

Zoals al eerder vermeld is het onderdeel nog nieuw en compleet met alle montage onderdelen, hieronder de beschrijving welke erbij hoort vanaf de leverancier;

If you want to achieve maximum engine performance and extend the life of your RX-8 ignition system, our new and improved ignition coil bracket is an excellent place to start!                                  
The RX-8 ignition system has long proven to be a weak point of the platform. Unfortunately coil failure and the related misfires don't just make the car run poorly and foul out spark plugs, it can actually destroy the expensive catalytic convertor and/or lead to serious engine damage.

Our New Ignition Coil Bracket is designed as a direct replacement for the Mazda factory bracket.  Made of aluminum, It is very lightweight and designed to eliminate the flat metal area under the ignition coil which has proven to have many positive benefits such as: 

• The ignition coil's operating temperature becomes significantly reduced
• The coils ability to misfire to the mounting bracket through the bottom is eliminated
• A moisture collection area is also removed! (which further decrease chances of coil misfire)

These benefits are an excellent way to extend coil life and improve engine performance by ensuring consistent and efficient spark plug firing. Even better, you can achieve these improvements without the high cost of aftermarket ignition kits.

Features:
•Extended coil life
•Reduces chance of engine misfires
•Is a direct replacement for the Mazda factory bracket
•Made from high quality 5052 aluminum material.   
•Bracket is half a pound lighter than the factory steel bracket
•Maintains factory wiring harness mounting locations
•Easy to install (plug and play)

Kortom een upgrade van je ontstekingssysteem zonder ingewikkelde aanpassingen of de verplichting tot koop van extra onderdelen om er gebruik van te kunnen maken. Dergelijk onderdeel wordt in NL niet gemaakt of geleverd.

Prijs in de USA is $80,- (zonder import en verzendkosten)

Mijn vraagprijs is 80,- euro (excl. evt. verzendkosten)

Mocht iemand interesse hebben en naar JapFest gaan op 8 Mei a.s. dan kan ik hem ook meebrengen.
Omhoog Onderwerp Commercieel / Commercieel / Te Koop: Performance Coil Bracket (nieuw)

Powered by mwForum 2.29.7 © 1999-2015 Markus Wichitill